Athan Corporation
  • Home
  • Shop
  • About
  • Updates
  • Contact

NEW TASCAM 48 1/2" COUNTER ROLLER

12/28/2018

0 Comments

 
New design counter roller built by Athan Corp for Tascam 48  1/2" tape machine with dual bearings. Includes 2 new bearings. 

Athan rollers will improve WOW and flutter spec's on your tape machine!

Key Advantages:
  • The new design counter roller core is made out of brass which will dampen vibration that comes through the Capstan motor and transport.
  • Made with new top quality polyurethane material that is the result of years of innovative research and development by Athan Corporation.  It should last 4-5x longer than the original.
  • Specifically developed with a natural color polyurethane which ELIMINATES the black residue created by other black rubber pinch rollers while making it easier for clients to detect dirt build-up on the counter roller.
​
Picture
Picture
0 Comments

NEW PINCH ROLLER FOR AMPEX 440 AND 350

12/27/2018

0 Comments

 
New dual bearing design pinch roller built by Athan Corp for Ampex 440/350 1/4" and 1/2" machine. Includes two new bearings. 

Athan Pinch Rollers will improve WOW and flutter spec's on your tape machine!

Key Advantages

  • The new design pinch roller core is made out of brass which will dampen vibration that comes through the Capstan motor and transport.
  • Made with new top quality polyurethane material that is the result of years of innovative research and development by Athan Corporation.  It should last 4-5x longer than the original.
  • Specifically developed with a natural color polyurethane which ELIMINATES the black residue created by other black rubber pinch rollers while making it easier for clients to detect dirt build-up on the pinch roller.
  • Having bearings instead of bushings means you will not have runout on the pinch roller.  This is because the bushings sit loosely on the shaft which creates runout problems, where bearings sit snug which eliminates runout.
​
Picture
Picture
0 Comments

COUNTER ROLLER FOR 1" TASCAM MS-16, MSR-24, MSR-24S & ATR-60-16

8/17/2018

0 Comments

 
New design Counter Roller built by Athan Corp for 1" Tascam MS-16, MSR-24 & MSR-24S & ATR-60-16.  Dual bearing design includes 2 new bearings.

Athan rollers will improve WOW and flutter spec's on your tape machine!

Key Advantages:
  • Made with new top quality polyurethane material that is the result of years of innovative research and development by Athan Corporation. It should last 4-5x longer than the original.
  • Specifically developed with a natural color polyurethanewhich ELIMINATES the black residue created by other black rubber rollers while making it easier for clients to detect dirt build-up on the roller.
  • Having bearings instead of bushings means you will not have runout on the pinch roller. This is because the bushings sit loosely on the shaft which creates runout problems, where bearings sit snug which eliminates runout.
ATHAN P/N: ATH-MS16-T
Picture
Picture
0 Comments

NEW 3M-79 REVERSING IDLER WITH TWO BEARINGS

4/23/2018

0 Comments

 
New reversing idler for 3M-79 is made with new, top quality polyurethane material that is the result of decades of innovative research and development by Athan Corporation. Includes two new bearings. 

Athan Reversing Idlers will improve WOW and flutter spec's on your tape machine!

​Key Advantages:
  • The new design pinch roller core is made out of brass which will dampen vibration that comes through the Capstan motor and transport.
  • Made with new top quality polyurethane material that is the result of years of innovative research and development by Athan Corporation.  It should last 4-5x longer than the original.
  • Specifically developed with a natural color polyurethane which ELIMINATES the black residue created by other black rubber pinch rollers while making it easier for clients to detect dirt build-up on the pinch roller.
  • Having bearings instead of bushings means you will not have runout on the pinch roller.  This is because the bushings sit loosely on the shaft which creates runout problems, where bearings sit snug which eliminates runout.
Picture
Picture
0 Comments

NEW AMPEX ATR-124 CAPSTAN/ TACH ASSEMBLY 2"

4/6/2018

0 Comments

 
Ampex Capstan/ Tach Assembly 2" (ATR-124)
Our new 2" Capstan/ Tach Assembly, built by Athan Corp for the Ampex ATR-124, eliminates tape slippage encountered during editing with improved polyurethane assemblies. We recommend this purchase for all ATR-124 machines
​
Athan Pinch Rollers will improve WOW and flutter spec's on your tape machine!

This new, top quality polyurethane material assures:
  • No tape slippage
  • No servo instability
  • No inaccurate location readings
​
Unlike aluminum assemblies, these will not wear to a smooth surface. Athan Corp's precise method of mounting the tach disk will greatly reduce flutter. Flutter can go as low as .02% @ 15 ips NAB unweighted and .018% @ 30 ips. We recommend this purchase for all ATR-100 machines. ​
Picture
0 Comments

REVERSING IDLER FOR 1/4" & 1/2" 3M-79

3/2/2018

0 Comments

 
New reversing idler for 1/4" & 1/2"  3M-79 machine.  Made with new, top quality polyurethane material that is the result of decades of innovative research and development by Athan Corporation. Includes two new bearings. 

Athan Reversing Idlers will improve WOW and flutter spec's on your tape machine!

Key Advantages:
  • Made with new top quality polyurethane material that is the result of years of innovative research and development by Athan Corporation.  It should last 4-5x longer than the original.
  • Specifically developed with a natural color polyurethane which ELIMINATES the black residue created by other black rubber pinch rollers while making it easier for clients to detect dirt build-up on the pinch roller.
  • Having bearings instead of bushings means you will not have runout on the pinch roller.  This is because the bushings sit loosely on the shaft which creates runout problems, where bearings sit snug which eliminates runout.
Picture
Picture
0 Comments

INTRODUCING OUR NEW LINE OF AKAI PINCH ROLLERS!

2/19/2018

3 Comments

 
New AKAI pinch rollers built by Athan Corp with our new bearing design. 

Athan Pinch Rollers will improve WOW and flutter spec's on your tape machine!

Key Advantages
  • The new design pinch roller core is made out of brass which will dampen vibration that comes through the Capstan motor and transport.
  • Made with new top quality polyurethane material that is the result of years of innovative research and development by Athan Corporation.  It should last 4-5x longer than the original.
  • Specifically developed with a natural color polyurethane which ELIMINATES the black residue created by other black rubber pinch rollers while making it easier for clients to detect dirt build-up on the pinch roller.
  • Having bearings instead of bushings means you will not have runout on the pinch roller.  This is because the bushings sit loosely on the shaft which creates runout problems, where bearings sit snug which eliminates runout.

Shop in our Pro-Audio store for a complete list of AKAI tape recorder models.
Picture
Picture
3 Comments

New Tascam Tach roller for ATR-80 Machine

12/8/2017

0 Comments

 
New tach roller built by Athan Corp for Tascam ATR-80 24 TRK 2" tape machine with bearings. Dual bearing design includes two new bearings.  

Athan Counter Rollers will improve WOW and flutter spec's on your tape machine!

​Key Advantages
  • Made with new top quality polyurethane material that is the result of years of innovative research and development by Athan Corporation.  It should last 4-5x longer than the original.
  • Our specifically developed natural color polyurethane ELIMINATES the black residue created by other black rubber tach rollers while also makes it easier for clients to detect dirt build-up on the tach roller.
  • Made with new ABEC 7 bearings.​
Picture
0 Comments

New pinch roller for studer c37 2 Trk machine

9/29/2017

0 Comments

 
New pinch roller built by Athan Corp for Studer C37  2 TRK  1/2" & 1/4"  tape machines.  

Athan Pinch Rollers will improve WOW and flutter spec's on your tape machine!

​Key Advantages
  • The new design pinch roller core is made out of brass which will dampen vibration that comes through the Capstan motor and transport.
  • Made with new top quality polyurethane material that is the result of years of innovative research and development by Athan Corporation.  It should last 4-5x longer than the original.
  • Specifically developed with a natural color polyurethane which ELIMINATES the black residue created by other black rubber pinch rollers while making it easier for clients to detect dirt build-up on the pinch roller.
Picture
Picture
0 Comments

NEW TASCAM 1/2" MSR-16  COUNTER ROLLER

9/21/2017

1 Comment

 
New design counter roller built by Athan Corp for Tascam 1/2" MSR-16 tape machine.  Includes 2 new ABEC 7 bearings. 

Athan rollers will improve WOW and flutter spec's on your tape machine!

Key Advantages:
  • The new design counter roller core is made out of brass which will dampen vibration that comes through the Capstan motor and transport.
  • Made with new top quality polyurethane material that is the result of years of innovative research and development by Athan Corporation.  It should last 4-5x longer than the original.
  • Specifically developed with a natural color polyurethane which ELIMINATES the black residue created by other black rubber pinch rollers while making it easier for clients to detect dirt build-up on the  roller.
  • Made with new ABEC 7 bearings which sit snug and eliminates runout.


Picture
1 Comment
<<Previous

    Author

    Athan Corp is geared toward the needs of professionals in the pro-audio and pro-video industries.  Follow us to see our newest high precision products and services.

    Categories

    All

    RSS Feed


Find your product or service quickly by searching here. 
  • Home
  • Shop
  • About
  • Updates
  • Contact